Wokwi: Learn Arduino for Free Without Buying a Single Part (Beginner Guide 2026)
Wokwi explained: an Arduino simulator in your browser. Wire up LEDs, buttons, sensors and displays, write code and run it, and if you burn something it is just a simulation. Free and great for engineering students and beginners.
If you are an engineering student or want to get into electronics, you have heard of Arduino. The problem is that the moment you want to start, you need to buy a board, LEDs, sensors and wires, and you are not even sure you will stick with it. The answer is Wokwi: a site that lets you learn Arduino for free, without buying a single part.
What is Wokwi?
Wokwi is an Arduino simulator that runs in your browser. The board is right there on the screen: you connect LEDs, buttons, sensors and displays to it, then write your code and run it as if it were a real board. It is not just Arduino UNO either: ESP32 and Raspberry Pi Pico are supported too.
How does it work?
- Go to wokwi.com and pick Arduino UNO.
- A new project opens: code on the left, board on the right.
- Click the + button and add the parts you need, like an LED, a button or a sensor.
- Connect wires between the parts and the board with your mouse.
- Write your code, hit Run, and see the result instantly.
First project: make the LED blink
The easiest first project is making the on-board LED turn on and off every second:
- In setup, write pinMode(13, OUTPUT) to tell the board pin 13 is an output.
- In loop, write digitalWrite(13, HIGH) to turn the LED on.
- Then delay(1000) to wait one second.
- Then digitalWrite(13, LOW) to turn it off, and delay(1000) again.
- Hit Run and watch the LED blink.
Why Wokwi is great for beginners
- Free and runs in the browser, nothing to install.
- No parts to buy before you start.
- Wired something wrong and burned it? It is a simulation, nothing lost.
- Lots of ready-made projects to open and learn from.
- Share your project with a link to friends or your professor.
Wokwi or Tinkercad?
| Site | Strengths | Best for |
|---|---|---|
| Wokwi | Fast, many parts, ESP32 and Pico | Trying real projects |
| Tinkercad Circuits | Very easy, plus 3D design | Absolute beginners and kids |
Tips to get the most out of it
Start with ready-made projects
Open a project, run it, then change the code and see what happens.
Type the code yourself
Do not just copy and paste, even when the code is short.
Buy parts once you are comfortable
After you understand the basics on Wokwi, buy the board and parts knowing exactly what you are doing.
FAQ
Is Wokwi free?
Yes, you can build and run projects for free, and there is a paid plan for extra features.
Do I need to install anything?
No, Wokwi runs straight from your browser.
Can it replace a real board?
It is great for learning and experimenting, but you will need real parts for a project you actually use.
Does it support boards other than Arduino UNO?
Yes, including Arduino Mega, Nano, ESP32 and Raspberry Pi Pico.